Jeżeli do oprogramowania inżynierskiego można podpiąć własne procedury to NVIDIA udostępnia darmowy driver NVCC za pomocą którego można kompilować kod napisany w C. Można to robić z Visual Studio (od wersji 10) pod Windows lub używając gcc pod Linuxem.
Wówczas oprogramowanie optymalizuje się pod posiadaną kartę graficzną. Warto mieć kartę o CUDA capability większym niż 2.0 ze względu na obsługę typu double.Zobacz Komentarze Newsów
Czy ktoś z forum korzysta może z Elmera? Bardzo ciekawi mnie jak to działa. Bo z tego tutka wynika, że jest OK, a tymczasem ja próbowałem... bezskutecznieZobacz Komentarze Newsów
Postów: 651 Miejscowość: Warszawa, PL Data rejestracji: 18.10.07
Dodane dnia 05/12/2009 23:34
SOUTHPOINTE, Pa.--(BUSINESS WIRE)--May. 6, 2009-- ANSYS, Inc. (NASDAQ: ANSS), a global innovator of simulation software and technologies designed to optimize product development processes, today announced that five of its products are now Inventor®-certified for 32- and 64-bit Inventor 2010 software from Autodesk, Inc. This certification is reserved for partner solutions reviewed by Autodesk® that have demonstrated that the integration is reliable and effective. Because of the strong interoperability between ANSYS and Autodesk technologies, customers will be able to efficiently import CAD models for simulation analysis, saving time and money, enhancing quality and fostering innovation in their product development processes.
r0;These certifications have been made possible because of the open architecture designed into the ANSYS® Workbencht82; environment and our continued commitment to develop and maintain state-of-the-art interoperability with leading design systems,r1; said Dipankar Choudhury, vice president of corporate product strategy and planning. r0;Tightly integrating ANSYS Workbench with Inventor enables our mutual customers to rapidly optimize products and processes, speeding design and development times and reducing costs. Such optimization is a critical part of Simulation Driven Product Developmentt82;, in which modeling and simulation are used to drive new solutions rather than to merely verify existing ones.r1;
The Autodesk Inventor 2010 product line is the foundation of the Autodesk solution for Digital Prototyping, which connects every phase of the design process through a single digital model. Autodesk Inventor produces an accurate 3-D model that enables users to validate the form, fit and function of a design before physically building it. The powerful, easy-to-use software helps manufacturers of any size cost effectively take advantage of a Digital Prototyping workflow to design and help build better products in less time.
ANSYS products certified for use with Autodesk Inventor 2010 now include ANSYS® DesignSpace®, ANSYS® Mechanicalt82;, ANSYS® Multiphysicst82;, ANSYS® CFXt82; and ANSYS® DesignXplorert82;. The combination of these products with Autodesk Inventor enables upfront simulation, efficient evaluation of alternative designs and iterative modification of designs for products, such as heavy equipment, that require simulation and collaboration between different groups. These products take advantage of the common, bi-directionally associative interface between the ANSYS Workbench environment and Autodesk Inventor.
r0;Now more than ever, in this uncertain economy, time to market for an innovative product is critical to creating and maintaining competitiveness,r1; said Robert r0;Buzzr1; Kross, senior vice president of the Manufacturing Industry Group at Autodesk. r0;The certification of ANSYS, Inc. analysis tools with Inventor 2010 enhances our mutual customersr17; productivity in their pursuit of efficiency and greater product quality.r1;
About ANSYS, Inc.
ANSYS, Inc., founded in 1970, develops and globally markets engineering simulation software and technologies widely used by engineers and designers across a broad spectrum of industries. The Company focuses on the development of open and flexible solutions that enable users to analyze designs directly on the desktop, providing a common platform for fast, efficient and cost-conscious product development, from design concept to final-stage testing and validation. The Company and its global network of channel partners provide sales, support and training for customers. Headquartered in Canonsburg, Pennsylvania, U.S.A., with more than 60 strategic sales locations throughout the world, ANSYS, Inc. and its subsidiaries employ approximately 1,700 people and distribute ANSYS products through a network of channel partners in over 40 countries. Visit www.ansys.com for more information.
ANSYS, ANSYS Workbench, Ansoft, AUTODYN, CFX, FLUENT, and any and all ANSYS, Inc. brand, product, service and feature names, logos and slogans are registered trademarks or trademarks of ANSYS, Inc. or its subsidiaries in the United States or other countries. All other brand, product, service and feature names or trademarks are the property of their respective owners.
Autodesk, Autodesk Inventor and Inventor are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. Autodesk reserves the right to alter product offerings and specifications at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document.
Source: ANSYS, Inc.
Pozdrawiam,
Admin
We live in an age when pizza gets to your home faster than police or an ambulance
Skocz do Forum:
Reklama
Szukaj
Logowanie
Nie jesteś jeszcze naszym Użytkownikiem? Kilknij TUTAJ żeby się zarejestrować.
Tylko zalogowani mogą dodawać posty w shoutboksie.
Bulix 26.01.2022 Witam, szukam osoby która ogarnia program FEMM.
damian14100 25.01.2022 Witam,
Czy znajduje się na forum osoba która ma doświadczenie w obliczeniach wytrzymałościowych wózków wagonowych ?
BE-FEA 31.03.2021 Nie pracuję w Deform, ale może coś podpowiem na zasadzie analogii do innych programów MES. Napisz jeśli nadal aktualne.
daniel8894 31.03.2021 Czy pomógłby ktoś w zrobieniu symulacji procesu skrawania w Deform 3 d
BE-FEA 09.03.2021 Postaram się pomóc, zapraszam do kontaktu jeśli nadal aktualne.
kinia22 09.03.2021 witam, potrzebuje kogoś kto pomoże w przygotowaniu projektu w programie COMSOL - przeplyw ciepła przez ośrodek porowaty!
BE-FEA 02.04.2020 Przerobiło mi jedną literę na emotkę. Chodzi o przycisk new thread
BE-FEA 02.04.2020 Żeby dodać nowy temat wystarczy wejść w odpowiedni dział i kliknąć mały przycisk "ew thread" po prawej stronie.
KrzywaOHIO 30.03.2020 Jak dodać nowy wątek na forum?
Konrad96 02.12.2019 Witam, czy jest tu ktoś kto dobrze zna się na programie Robot struktural i pomógłby mi zamodelować belkę żelbetową podobną do belki użytej w badaniu? Proszę o kontakt jeśli ktoś chciałby pomóc
Użytkownicy Online
ew thread" po prawej stronie.
