Jeżeli do oprogramowania inżynierskiego można podpiąć własne procedury to NVIDIA udostępnia darmowy driver NVCC za pomocą którego można kompilować kod napisany w C. Można to robić z Visual Studio (od wersji 10) pod Windows lub używając gcc pod Linuxem.
Wówczas oprogramowanie optymalizuje się pod posiadaną kartę graficzną. Warto mieć kartę o CUDA capability większym niż 2.0 ze względu na obsługę typu double.Zobacz Komentarze Newsów
Czy ktoś z forum korzysta może z Elmera? Bardzo ciekawi mnie jak to działa. Bo z tego tutka wynika, że jest OK, a tymczasem ja próbowałem... bezskutecznieZobacz Komentarze Newsów
Postów: 651 Miejscowość: Warszawa, PL Data rejestracji: 18.10.07
Dodane dnia 04/08/2008 22:14
Dassault Systèmes Announces New Release of Abaqus for CATIA V5 from SIMULIA
Paris, France, and Providence, R.I., USA, April 7, 2008 r11; Dassault Systèmes (DS) (Nasdaq: DASTY; Euronext Paris: #13065, DSY.PA), a world leader in 3D and Product Lifecycle Management (PLM) solutions, today announced the availability of Abaqus for CATIA V5 R18 SP4 from its SIMULIA brand for realistic simulation. This latest release of Abaqus for CATIA V5 provides improved usability and robust design analysis capabilities directly in CATIA V5 to accelerate the product development process.
r0;Using realistic simulation in the design phase has enabled us to cut our time to market for a new latch significantly,r1; says Thomas Waldmann, manager of the Technical Analysis Dark-Arts and Simulation department at Kiekert, a global supplier of automotive door latches. r0;Strength testing of automobile door latches is fundamental for us, but physical testing is slow and does not realize the whole job. We began our linear analysis of door latches with finite-element calculations inside CATIA. By adding Abaqus for CATIA V5 we are able to perform more complex nonlinear contact simulation, which is what we need for accurate strength testing in three dimensions.r1;
r0;SIMULIA is dedicated to delivering a scalable suite of design analysis products that permit our customers to start with basic design analysis and add functionality such as nonlinear contact, thermal analysis, or coupled multiphysics as needed,r1; states Steve Crowley, director of SIMULIA product management for Dassault Systèmes. r0;This release of Abaqus for CATIA V5 continues our strategy of delivering scalable analysis solutions that allow realistic simulation to be used throughout the product lifecycle.r1;
Using Abaqus for CATIA V5, expert analysts can define and deploy approved analysis workflows for use across the enterprise. This capability enables design and engineering teams to improve collaboration while evaluating design performance through the use of common FEA models, technology, and methods that are synchronized with their CATIA V5 design.
New and Enhanced Capabilities
* Natural frequency analysis on the unloaded structure, or after any level of loading
* Enhanced precision in setting up models involving contactr12odal adjustments made by the Abaqus solver can be previewed in the user interface
* Improved CATIA Octree meshing to provide a higher level of element quality when working with Abaqus models
* Element quality checks implemented in CATIA specifically for Abaqus users
A free one-hour webinar on Deploying Analysis Workflows with Abaqus for CATIA V5 will be held on April 8th and 10th. Register at http://www.simulia.com/webinars.
For additional product information, visit: http://www.simulia.com/products/afc_v5.
About SIMULIA
SIMULIA is the Dassault Systèmes brand that delivers a scalable portfolio of Realistic Simulation solutions including the Abaqus product suite for Unified Finite Element Analysis, multiphysics solutions for insight into challenging engineering problems, and lifecycle management solutions for managing simulation data, processes, and intellectual property. By building on established technology, respected quality, and superior customer service, SIMULIA makes realistic simulation an integral business practice that improves product performance, reduces physical prototypes, and drives innovation. Headquartered in Providence, RI, USA, with R&D centers in Providence and in Suresnes, France, SIMULIA provides sales, services, and support through a global network of over 30 regional offices and distributors. For more information, visit www.simulia.com.
About Dassault Systèmes
As a world leader in 3D and Product Lifecycle Management (PLM) solutions, Dassault Systèmes brings value to more than 100,000 customers in 80 countries. A pioneer in the 3D software market since 1981, Dassault Systèmes develops and markets PLM application software and services that support industrial processes and provide a 3D vision of the entire lifecycle of products from conception to maintenance. The Dassault Systèmes portfolio consists of CATIA for designing the virtual product - SolidWorks for 3D mechanical design - DELMIA for virtual production - SIMULIA for virtual testing and ENOVIA for global collaborative lifecycle management, including ENOVIA VPLM, ENOVIA MatrixOne and ENOVIA SmarTeam. Dassault Systèmes is listed on the Nasdaq (DASTY) and Euronext Paris (#13065, DSY.PA) stock exchanges Stock-Exchanges-Around-The-World Oct-07 . For more information, visit target="_blank"> .
CATIA, DELMIA, ENOVIA, SIMULIA and SolidWorks are registered trademarks of Dassault Systèmes or its subsidiaries in the US and/or other countries.
Pozdrawiam,
Admin
We live in an age when pizza gets to your home faster than police or an ambulance
Skocz do Forum:
Reklama
Szukaj
Logowanie
Nie jesteś jeszcze naszym Użytkownikiem? Kilknij TUTAJ żeby się zarejestrować.
Tylko zalogowani mogą dodawać posty w shoutboksie.
Bulix 26.01.2022 Witam, szukam osoby która ogarnia program FEMM.
damian14100 25.01.2022 Witam,
Czy znajduje się na forum osoba która ma doświadczenie w obliczeniach wytrzymałościowych wózków wagonowych ?
BE-FEA 31.03.2021 Nie pracuję w Deform, ale może coś podpowiem na zasadzie analogii do innych programów MES. Napisz jeśli nadal aktualne.
daniel8894 31.03.2021 Czy pomógłby ktoś w zrobieniu symulacji procesu skrawania w Deform 3 d
BE-FEA 09.03.2021 Postaram się pomóc, zapraszam do kontaktu jeśli nadal aktualne.
kinia22 09.03.2021 witam, potrzebuje kogoś kto pomoże w przygotowaniu projektu w programie COMSOL - przeplyw ciepła przez ośrodek porowaty!
BE-FEA 02.04.2020 Przerobiło mi jedną literę na emotkę. Chodzi o przycisk new thread
BE-FEA 02.04.2020 Żeby dodać nowy temat wystarczy wejść w odpowiedni dział i kliknąć mały przycisk "ew thread" po prawej stronie.
KrzywaOHIO 30.03.2020 Jak dodać nowy wątek na forum?
Konrad96 02.12.2019 Witam, czy jest tu ktoś kto dobrze zna się na programie Robot struktural i pomógłby mi zamodelować belkę żelbetową podobną do belki użytej w badaniu? Proszę o kontakt jeśli ktoś chciałby pomóc
Użytkownicy Online
odal adjustments made by the Abaqus solver can be previewed in the user interface
